RF24Ethernet - TCP/IP over RF24Network  1.6b
TMRh20 - Pushing the practical limits of RF24 modules
InteractiveServer_Mesh.ino

This is an example of how to create a more advanced interactive web server.

/*
* RF24Ethernet InteractiveServer example by TMRh20
* - Webserver controlling an LED example
*
* RF24Ethernet uses the uIP stack by Adam Dunkels <adam@sics.se>
*
* This example demonstrates how to configure a sensor node to act as a webserver and
* allows a user to control a connected LED by clicking links on the webpage
* The requested URL is used as input, to determine whether to turn the LED off or on
*
* In order to minimize memory use and program space:
* 1. Open the RF24Network library folder
* 2. Edit the RF24Networl_config.h file
* 3. Un-comment #define DISABLE_USER_PAYLOADS
*
*
* This example uses RF24Mesh.
* Set #define UIP_CONF_LLH_LEN 0 in uip_conf.h if used with a TUN(RF24Mesh) or SLIP interface
*
*/
#include <SPI.h>
#include <RF24.h>
#include <RF24Network.h>
//#include <printf.h>
#include <RF24Ethernet.h>
#include "HTML.h"
#include "RF24Mesh.h"
/*** Configure the radio CE & CS pins ***/
RF24 radio(7, 8);
RF24Network network(radio);
RF24Mesh mesh(radio,network);
RF24EthernetClass RF24Ethernet(radio, network,mesh);
#if defined (ARDUINO_ARCH_ESP8266)
#define LED_PIN BUILTIN_LED
#else
#define LED_PIN A3 //Analog pin A3
#endif
// Configure the server to listen on port 1000
EthernetServer server = EthernetServer(1000);
/**********************************************************/
static unsigned short generate_tcp_stats();
void setup() {
Serial.begin(115200);
//printf_begin();
Serial.println("start");
pinMode(LED_PIN, OUTPUT);
IPAddress myIP(10, 10, 2, 4);
Ethernet.begin(myIP);
mesh.begin();
//Set IP of the RPi (gateway)
IPAddress gwIP(10, 10, 2, 2);
Ethernet.set_gateway(gwIP);
server.begin();
}
/********************************************************/
uint32_t mesh_timer = 0;
void loop() {
// Optional: If the node needs to move around physically, or using failover nodes etc.,
// enable address renewal
if(millis()-mesh_timer > 30000){ //Every 30 seconds, test mesh connectivity
mesh_timer = millis();
if( ! mesh.checkConnection() ){
//refresh the network address
mesh.renewAddress();
}
}
size_t size;
if (EthernetClient client = server.available())
{
uint8_t pageReq = 0;
generate_tcp_stats();
while ((size = client.available()) > 0)
{
// If a request is received with enough characters, search for the / character
if (size >= 7) {
client.findUntil("/", "/");
char buf[3] = {" "};
if(client.available() >= 2){
buf[0] = client.read(); // Read in the first two characters from the request
buf[1] = client.read();
if (strcmp(buf, "ON") == 0) { // If the user requested http://ip-of-node:1000/ON
led_state = 1;
pageReq = 1;
digitalWrite(LED_PIN, led_state);
}else if (strcmp(buf, "OF") == 0) { // If the user requested http://ip-of-node:1000/OF
led_state = 0;
pageReq = 1;
digitalWrite(LED_PIN, led_state);
}else if (strcmp(buf, "ST") == 0) { // If the user requested http://ip-of-node:1000/ST
pageReq = 2;
}else if (strcmp(buf, "CR") == 0) { // If the user requested http://ip-of-node:1000/CR
pageReq = 3;
}else if(buf[0] == ' '){
pageReq = 4;
}
}
}
// Empty the rest of the data from the client
//while (client.waitAvailable()) {
client.flush();
//}
}
/**
* Based on the incoming URL request, send the correct page to the client
* see HTML.h
*/
switch(pageReq){
case 2: stats_page(client); break;
case 3: credits_page(client); break;
case 4: main_page(client); break;
case 1: main_page(client); break;
default: break;
}
client.stop();
Serial.println(F("********"));
}
// We can do other things in the loop, but be aware that the loop will
// briefly pause while IP data is being processed.
}
/**
* This section displays some basic connection stats via Serial and demonstrates
* how to interact directly with the uIP TCP/IP stack
* See the uIP documentation for more info
*/
static unsigned short generate_tcp_stats()
{
struct uip_conn *conn;
// If multiple connections are enabled, get info for each active connection
for (uint8_t i = 0; i < UIP_CONF_MAX_CONNECTIONS; i++) {
conn = &uip_conns[i];
// If the application state is active for an available connection, print the info
if (conn->appstate) {
Serial.print(F("Connection no "));
Serial.println(i);
Serial.print(F("Local Port "));
Serial.println(htons(conn->lport));
Serial.print(F("Remote IP/Port "));
Serial.print(htons(conn->ripaddr[0]) >> 8);
Serial.print(F("."));
Serial.print(htons(conn->ripaddr[0]) & 0xff);
Serial.print(F("."));
Serial.print(htons(conn->ripaddr[1]) >> 8);
Serial.print(F("."));
Serial.print(htons(conn->ripaddr[1]) & 0xff);
Serial.print(F(":"));
Serial.println(htons(conn->rport));
Serial.print(F("Outstanding "));
Serial.println((uip_outstanding(conn)) ? '*' : ' ');
}
}
}