RF24Mesh  V1.0.3b
A user friendly mesh overlay for sensor networks using RF24Network and nRF24L01 radio modules
Macros
RF24Mesh_config.h File Reference

Go to the source code of this file.

Macros

#define MESH_MAX_CHILDREN   4 /** Set 1 to 4 (Default: 4) Restricts the maximum children per node. **/
 
#define MESH_WRITE_TIMEOUT   5550 /** How long mesh.write will retry failed payloads. */
 
#define MESH_DEFAULT_CHANNEL   97 /** Radio channel to operate on 1-127. This is normally modified by calling mesh.setChannel() */
 
#define MESH_RENEWAL_TIMEOUT   60000 /** How long to attempt address renewal */
 
#define MESH_MIN_SAVE_TIME   30000 /** Minimum time required before changing nodeID. Prevents excessive writing to EEPROM */
 Other Configuration. More...
 
#define MESH_DEFAULT_ADDRESS   04444
 
#define MESH_MAX_ADDRESSES   255 /** Determines the max size of the array used for storing addresses on the Master Node */
 

Macro Definition Documentation

#define MESH_MAX_CHILDREN   4 /** Set 1 to 4 (Default: 4) Restricts the maximum children per node. **/
#define MESH_WRITE_TIMEOUT   5550 /** How long mesh.write will retry failed payloads. */
#define MESH_DEFAULT_CHANNEL   97 /** Radio channel to operate on 1-127. This is normally modified by calling mesh.setChannel() */
#define MESH_RENEWAL_TIMEOUT   60000 /** How long to attempt address renewal */
#define MESH_MIN_SAVE_TIME   30000 /** Minimum time required before changing nodeID. Prevents excessive writing to EEPROM */

Other Configuration.

#define MESH_DEFAULT_ADDRESS   04444
#define MESH_MAX_ADDRESSES   255 /** Determines the max size of the array used for storing addresses on the Master Node */